A Closer Look at Assessment Validation: Validating Assessments Explained
A Closer Look at Assessment Validation: Validating Assessments Explained
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
Breaking Down the Two Types of Assessment Validation
An Introduction to Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.
When to Conduct Assessment Tool Validation
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.
There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- you update resources
- new training products are added by you on scope
- training product updates are reviewed against your course
- learning resources are identified as a risk during the risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
What Training Products Need Validation?
Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.
What You Need for Assessment Tool Validation
Study Resources
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Validation Group
Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.
Together, your validation panel should possess:
Vocational competencies and current industry skills relevant to the unit being validated
Current knowledge and skills in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its replacement
Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Review?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Assessment Key Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Fundamental Rules of Evidence
Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and modern industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Walk the Talk
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
diaper change
prepare bottle, bottle feed babies and clean equipment
prepare solid food and feed infants
respond suitably to baby signs and cues
prepare infants for sleep and settle them
monitor and encourage age-appropriate physical exploration and gross motor skills
Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement get more info calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
All or No Competence
Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?
The answer may include:
Needed resources
Applicable expenses
Time assigned for activities
Designated roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolation of the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering
People – isolation, engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering
Chemical hazards – isolation, engineering, administration
Equipment or machinery – isolation, engineering, administration
Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.
Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.